Welcome to Nimish Metal, your trusted partner in Safat, Kuwait, for top-tier steel solutions. We take pride in being a leading manufacturer and supplier, with a special focus on delivering the reliable C35 Round Bar. Renowned for its excellent balance of strength and machinability, this grade is a cornerstone for countless industrial projects. We ensure our clients receive material that meets the highest standards, backed by our commitment to quality and dependable service right here in the heart of Kuwait.
The C35 round bar is a medium carbon steel known for its well-rounded characteristics. Its composition includes carbon, manganese, and silicon, which contribute to its notable tensile strength and good wear resistance. While it can be hardened through heat treatment to increase its surface hardness, it maintains a level of toughness that makes it less brittle than higher carbon steels. This combination makes it relatively easy to machine and weld, offering a versatile set of mechanical properties for a wide range of demanding tasks.
|
Variant |
Cast |
Di |
Weldability |
C % |
Si % |
Mn % |
P % |
S % |
Cr % |
Ni % |
|
|---|---|---|---|---|---|---|---|---|---|---|---|
|
C35E |
CC |
0.98 |
CEV 0.65max |
Min |
0.35 |
0.15 |
0.50 |
– |
0.015 |
– |
– |
|
Pcm 0.49max |
Max |
0.39 |
0.35 |
0.80 |
0.030 |
0.035 |
0.30 |
0.30 |
| Variant | Condition | Format | Dimension [mm] | Yield strength min [MPa] | Tensile strength [MPa] | Elongation A5[%] | Hardness | Impact (ISO-V) strengthmin |
|---|---|---|---|---|---|---|---|---|
| Rp0.2 * Reh, ** Rel | ||||||||
| C35E | +AR | Round bar | < 20 | 345* | 520-690 | 10 | < 230 HB | 0 °C 0 J (long) 0 |
| EN | C35 (1.0501) |
| DIN | C35, CM35 |
| BS | 970 070M36 |
| UNI | C35 |
| JIS | S35C |
Considerations for installing C35 Round Bar include ensuring proper alignment, adequate support, correct machining, and adherence to safety and load-bearing requirements.
Yes, C35 Round Bar can be welded, but it requires proper preheating and post-weld heat treatment to avoid brittleness. Using appropriate welding electrodes is also essential for achieving strong, durable welds.
C35 Round Bar is available in various sizes, typically ranging from 10 mm to 250 mm in diameter, with custom sizes available upon request.
The versatility of the C35 round bar makes it a preferred choice across many industries. You’ll commonly find it used to create durable shafts, strong axles, and various gears and components in the automotive and general engineering sectors. Its reliability also lends itself to the construction of frames, fixtures, and structural parts where a good strength-to-weight ratio is essential. From agricultural machinery to general fabrication workshops, this material provides the dependable performance needed for applications that require a sturdy and workable steel.
We provide products that come with both mill test certificates and third-party test certificates, ensuring the highest standards of quality and compliance.
Nimish Metals is a leading manufacturer, supplier, and exporter of high-quality bars, rods, and forgings, catering to various industries in Safat, Kuwait
Copyright 2024 Nimish Metals. All rights reserved
